Call us toll free:
86 18588541249
Guangzhou Gaaye Electronics Co., Ltd.
What are the installation steps of the lamp holder？
2020-06-05 [ Industry News ]
1. Put the installed lamp cap on the plastic sleeve, and then insert it into the clip hole on the table lamp clip, put on the washer, and then fix the metal hose and the table lamp clip firmly with screws.2. Strip the insulating layer at the end of the power cord, and then install the power plug.3. Use a multimeter to set the switch to the R×1 range of the resistance, and set it to zero. Connect the red and black watch sticks to the two pins of the power plug. If the resistance is zero, it means that there is a short-circuit fault inside, which should be eliminated immediately.4. Use a multime......
How to connect the screw lamp holder
2020-05-27 [ Industry News ]
how to wire lamp holderFirst of all, make sure that the installed screw base is intactThe screw lamp holder has a simple structure and is easy to install. Before installing the screw base, make sure that the base is intact and there is no leakage, because the structure of the screw base is simple and there are relatively few measures to prevent leakage, so we need to install the screw base before Confirm the quality of the lamp holder.Re-confirm the quality of the screw sockets installed, lamp holder installationWhen we install the screw base, we must first confirm whether the screw ......
2020-05-26 [ Industry News ]
The fill light can only be used as a temporary fill light, not a complete replacement for sunlight.The fill light is suitable for a short period of time (no more than 2 months every six months) when the natural light is not enough, such as wintering / summer / meiyu. If your breeding environment does not have enough natural direct light throughout the year (such as indoors facing east and west), then you are not suitable for raising most Crassulaceae plants, please find another preference.The effect of the common red and blue led plant fill light is similar to scattered light. There is almost ......
The difference between a spotlight and a living room downlight
2020-05-26 [ Industry News ]
A spotlight is a highly condensed light fixture. Its light exposure has the function of specifying a specific target. It is mainly used for special lighting, such as emphasizing a very tasteful or innovative place. In addition to being used in the living room, many accessories Shops, jewelry stores will also be used.Downlights are a kind of lamps that are more condensing than ordinary surface-mounted lamps, and are mostly used for general lighting or auxiliary lighting. In comparison, the downlight is more practical, and the spotlight is mainly used for decoration, and its generality is not pr......
2020-05-26 [ Industry News ]
The bulb lamp is a bulb with a spherical design.lamp holder materialThe LED bulb uses the existing interface, that is, screw and socket (E26 \ E27 \ E14 \ B22, etc.), and even imitates the shape of the incandescent light bulb in order to meet people's usage habits. Based on the principle of unidirectional LED lighting, the designer has made changes in the structure of the lamp so that the light distribution curve of the LED bulb is basically the same as the point light source of the incandescent lamp.Guangzhou Gaaye Electronics Co., Ltdwww.gaaye.com......
