Guangzhou Gaaye Electronics Co., Ltd.

Call us toll free:
86 18588541249
Home News Industry News How to wire the e27 lamp holder What are the precautions for installation?
News Center

Industry News

How to wire the e27 lamp holder What are the precautions for installation?

How to wire the e27 lamp holder What are the precautions for installation?

e27 lamp holder installation steps


Step ①: After taking out the new lamp holder, first check whether the parts of the lamp holder are intact, and install it if there are no problems.


Step ②: Before the installation, you want to turn off the electric tube, then wipe off the old lamp holder, and tighten the new lamp holder in the direction of the screw port. Do not use excessive force when tightening to avoid damage to the screw port.


Step ③: After screwing, check whether the middle piece of metal is connected to the live wire. After the connection is complete, the light bulb can be installed, and it can be used after being powered on.


Note ①: When we install the lamp holder, we must first confirm whether the lamp holder we have installed meets the voltage standard, whether the quality is passed, whether there is any damage and so on.


Note ②: The minimum cross-section of the wire of the lamp holder should meet the minimum cross-sectional area specified by the country, because if the minimum cross-section of the wire of the lamp holder is lower than the minimum cross-sectional area specified by the country, it is easy to cause the wire to burn out and burn the lamp holder And even a fire accident. Therefore, when we wire the lamp holder, we must choose a wire larger than the minimum cross-section of the national standard to ensure the normal operation of the lamp holder in the future.

Guangzhou Gaaye Electronics Co., Ltd

www.gaaye.com